Specification:
■ Model: LFSN-D219
■ Filtration surface area: 0.18㎡
■ Filter element: Wedge wire screen (v-slot screen)
■ Filtration rate: 0.15mm (minimum 20microns).
■ Housing material: SS304/ SS316L/ 2205/ 2507…
■ Filter element material: SS304/ SS316L/ 2205/ 2507…
■ Inlet: 1.5" quick coupling connected
■ Outlet: 1.5" quick coupling connected
■ Drain outlet: 1" 1.5" quick coupling connected
■ Motor: 24V 120V
■ Air hole: 3/4"
■ Housing material: SS304
■ Filter element material: SS304
■ Scraper material: PTFE
■ Blowdown valve: manul valve
■ Filter surface treatment: Electric polish/ Sand-blasting/ Painting
Applicable industry:
1. Lithium battry slurry
2. Food & Beverage/ Fine Chemical/ Petrochemical/ Pharmaceutical/ Cosmetic/ Mineral/ Pulp&Paper/ Waste water Treatment
Working principle:
The raw liquid enters the filter through the inlet. During the filtration process, the impurity is accumulated on the stainless steel wedge wire filter element, and the inner impurity is gradually accumulated.
1. Automatic cleaning: When filtration working time reaches the set point, the electronic control system signal will work. The reducer begins to work; the reducer drives the metal scraper to remove the particles on the filter element external surface. When cleaning time reaches the set point, the drain valve is opened to blow down.
2. Manual cleaning: The recuder drives scrapers to remove the particles on the filter element external surface continuously. When the time reaches the set point, the drain valve opens and starts to blow down.
Back to list